Tag Archive | beret

My Beautiful Asian Doll Wears a Peplum

Since Madame Alexander dolls have no visible stitching at the neck and armhole, I choose “Lily” to wear this Peplum top by Liberty Jane at Pixie Faire. Her waist is slightly smaller than American Girl’s waist. Last time I worked with this Peplum pattern, I combined the print top with plain pedal pushers. Today I use a generic skirt pattern that matches the top.

DSC_0001

This peplum top is easy to make, and, as usual, the Liberty Jane pattern is easy to follow. I had no matching zipper for the back closure, so I used Velcro which made the closure a little tight in back. Always check the fit as you move along.

This skirt is a generic pattern that’s a rectangle measuring 13 inches x 5.5 inches, or cut on the fold, it’s 6.5 inches x 5.5 inches. If you’re fortunate to have a serger, finish the top and bottom edges. Create a casing for the elastic at the top. After threading the elastic through the casing with a bodkin or safety-pin, secure both ends of the elastic with a straight pin and stitch the side seam together. I basted the seam with the regular sewing machine and then finished it with the serger. You can make this skirt in an hour or less if you do everything by machine. I like to hem by hand, once the lower edge is finished.

I don’t always use a serger so if you don’t have one, you can still keep the inside of your doll clothes nice and neat. However, I’ve never been successful at using a zig-zag feature to finish my seams. The thread bunches up, making the zig-zag stitch bumpy. Or if I stitch close to the edge, I end up slipping off the edge, making a big mess. The stitch I end up using looks like small straight stitches in groups of three (called a Straight Stretch Stitch), undoubtedly designed for something else entirely.

If anyone has suggestions about using the zig-zag feature to finish seams, I’d love some feedback. Please share your successes.

I love making hats, especially berets. The standard beret pattern includes a circle, a large hoop that corresponds to the circle, and a band that goes around the smaller side of the hoop. I wanted to keep this look dressy, so I chose an icy color to correspond with the blue dress and this beautiful necklace, created by 2SistersSewCrafty at Etsy. This beret fabric was an unlabeled remnant. I don’t know what it is, but I doubt I’ll ever use it again.

DSC_0006.

I spent far too much time on a project that developed  into a horror story. I used the smallest sewing needle that I could find but still had difficulty sewing without the fabric bunching up and tearing. I sewed much of the hat by hand to avoid hitting the sequins. I lined the hat with Dotted Swiss (or Swiss Dot, depending on the manufacturer). Instead of making the hat band from the sequin fabric, I used the lining fabric—-and I prayed while stitching the band to the hat with my sewing machine that my needle wouldn’t lock or break.

I love the inside of my doll clothes to look pristine whenever possible. Here’s a peek at the inside of the top, skirt and beret.

DSC_0008

~~~~~

You can find us on Pinterest.

beret cat